xlab-gw: fix MSS clamp — match SYN-ACK too, use rt mtu ...

Old rule `tcp flags & (syn|ack) == syn` only matched plain SYN.
SYN-ACK from the server has SYN+ACK both set, so masking with
syn|ack and comparing == syn FAILED for SYN-ACK. Result: server
responses came back unclamped, full-MTU TCP segments overflowed
the WG path's effective MTU (1420 inner), large pages silently
stalled — YouTube didn't load, Microsoft pages partial-loaded,
Google was slow. Browsers retried indefinitely, looked like
"the network is broken" from a user perspective.

Replaced with `& (syn|rst) == syn` which matches both plain SYN
and SYN-ACK (only excludes RST, which carries no data). Combined
with `set rt mtu` instead of the hard 1280 — lets the kernel
pick the right MSS per egress interface (wg-to-wgnet → 1380 v4 /
1360 v6) instead of pessimistically clamping everything.

User's commented-out line had the right idea (rt mtu) but wrong
flag mask; fixed both at once.

skydick: also disable RA in systemd-networkd userspace ...

Sysctl accept_ra=0 only stops the kernel — systemd-networkd does
its own RA processing in userspace and was caching the link-DNS
even after the kernel sysctl was applied. Override the auto-
generated 40-bond0.network with networkConfig.IPv6AcceptRA=false.

skydick: suppress IPv6 RA processing on bond0 ...

`networking.enableIPv6 = false` only disables IPv6 forwarding/use;
the kernel still accepts router advertisements unless told otherwise.
The gateway's radvd was seeding fd99:23eb:1682::1 as a per-link DNS
on bond0, which then took precedence in systemd-resolved for AAAA
queries — making blocked names error as 'Connection refused' instead
of returning a clean NXDOMAIN through 10.0.0.1's mosdns.

Set accept_ra=0 globally + on bond0 explicitly. Existing 'enableIPv6
= false' continues to handle the higher-level disable.

skydick: route DNS via 10.0.0.1 only, AliDNS as fallback ...

Was: nameservers = [ "10.0.0.1" "223.5.5.5" ] — both treated as
primary by systemd-resolved, which then load-balanced to AliDNS
and bypassed mosdns's analytics blocking (resolvectl confirmed
hm.baidu.com / google-analytics.com leaking through).

Now: 10.0.0.1 only as primary, AliDNS demoted to fallbackDns so
it activates only when 10.0.0.1 is unreachable.

xlab-gateway: route DNS via local mosdns at 10.0.0.1 ...

Adds services.resolved with primary DNS 10.0.0.1 (network-local mosdns)
and Cloudflare as fallback. Removes the hardcoded DNS=166.111.8.28/29
on the wan99.0 link — those Tsinghua resolvers are subject to GFW
poisoning, and per-link DNS overrode the global resolved policy.

When 10.0.0.1 is reachable, this host inherits CN-aware split routing
and the network analytics-blocking policy. When 10.0.0.1 is down,
resolved transparently falls back to Cloudflare so internet keeps
working; queries return to 10.0.0.1 once it responds again.

skydick: use async NFS export for media dataset ...

Media data is re-downloadable torrents — sync write guarantees are
unnecessary. Switching to async bypasses SLOG round-trips and improves
write throughput from 358 to 490 MB/s. All other exports remain sync.

Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]>

skydick: add mirrored NVMe special vdev + mirrored SLOG ...

Replaced single-drive SLOG + L2ARC with dual-Optane mirrored setup:
- 690G mirrored special vdev for metadata + files ≤128K
- 8G mirrored SLOG for sync writes
- special_small_blocks=128K set in ZFS properties service
- nvme1 formatted to 4Kn to match nvme0

The special vdev is the biggest performance win for an HDD pool: all
metadata lookups, directory listings, and small files now hit NVMe.

Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]>

Update skydick README with InfluxDB and monitoring docs ...

Documents the fleet monitoring architecture: InfluxDB on ZFS,
Telegraf data sources, Grafana datasource layout, and ZFS
dataset management.

Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]>

Add InfluxDB v2 on skydick for fleet monitoring ...

- New modules/influxdb.nix: declarative InfluxDB v2 with ZFS-backed
  storage (dick/system/influxdb, bind-mounted to /var/lib/influxdb2)
- monitoring.nix: make influxUrl configurable (default: skydick)
- skydick/default.nix: enable influxdb, point telegraf to localhost
- datapool.nix: document influxdb dataset in hierarchy + creation cmds

Consolidates all monitoring data (door1 + skydick + IoT sensors) into
a single InfluxDB on the ZFS storage server for infinite retention.

Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]>

seems only mtu 1280 works for rdp

修复MSS

harden and fix: nftables input chain, sudo, agenix, ZFS, NAT priority ...

- Add inet input_filter table to xlab-gateway (policy drop on WAN)
- Restrict NOPASSWD sudo to ldx only; ylw uses password sudo via wheel
- Restructure secrets.nix with admins list, prepare for ylw ed25519 key
- Add ye-lw21 to trusted-users in common.nix
- Remove contradictory relatime=on when atime=off on rpool
- Fix NAT postrouting priority: filter → srcnat
- Remove duplicate nixpkgs.hostPlatform from xlab-gateway hardware-configuration

Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]>

skydick: document drive10 added as second hot spare ...

sg_format completed on drive10 (c9bcfa0f). Both LUNs added as spares,
bringing the pool to 8 mirrors + 2 hot spares (4 spare LUNs total).

Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]>

clamp mss to pmtu fix v6

skydick: document pool expansion to 8 mirrors (~50.9T) ...

Added 4 new SAS Mach2 drives (drive6-9) as 4 mirror vdevs. Updated
drive inventory, layout diagram, expansion commands, and runbook
with sg_format/wipefs steps. drive10 pending sg_format completion.

Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]>

Update networking.nix

Update networking.nix

add route from subnet to phicomm mgmt

fix gateway itself to .1

Update default.nix

Update default.nix

agenix?

Update dhcp.nix

Update dhcp.nix

fix syntax error

make sure DHCP start after interface initialization

skydick: fix localsearch, I/O schedulers, wait-online, NIC tuning ...

- Replace broken localsearch oneshot with proper miner daemon running as
  ldx on ldx's session bus (lingering enabled) so Samba Spotlight queries
  from macOS clients actually work
- Fix systemd-networkd-wait-online 2-min boot timeout (anyInterface=true)
- Add storage-tuning service to enforce mq-deadline on SAS HDDs and
  increase Mellanox ring buffers (1024→4096) at boot
- Simplify udev I/O scheduler rules to match by rotational attribute
  instead of hardcoded kernel device names
- Update TM dataset recordsize comments to reflect 1M (applied on pool)
- Fix deprecated linuxPackages_6_6.perf → perf

ZFS properties applied separately on skydick:
  com.sun:auto-snapshot=true on dick (was unset — no snapshots taken)
  com.sun:auto-snapshot=false on dick/users/ldx/timemachine
  recordsize=1M on dick/users/ldx/timemachine

Co-Authored-By: Claude Opus 4.6 <[email protected]>

skydick: drop fruit:time machine max size (buggy bandsize parser) ...

Samba's fruit_get_bandsize() regex-based plist parser fails on valid
Info.plist files. Rely on ZFS refquota on dick/users/ldx instead.

Co-Authored-By: Claude Opus 4.6 <[email protected]>

skydick: upgrade to nixos-25.11, add Spotlight + recycle bin ...

- Upgrade nixpkgs from nixos-24.11 to nixos-25.11 (Samba 4.20→4.22)
- Build sambaFull with Spotlight/tracker support via overlay:
  - Patch waf to detect tracker-sparql-3.0 (upstream only checks ≤2.0)
  - Patch rpcd_mdssvc for tinysparql 3.x bus API rename
    (get_async/get_finish → bus_new_async/bus_new_finish)
  - Disable tevent_glib_tracker test (uses removed tracker 2.x API, test-only)
  - Add icu for Unicode normalisation required by Spotlight
- Add Spotlight search with tracker backend for Finder search over SMB
- Add localsearch indexer service for public, media, and ldx files
- Add recycle bin (vfs recycle) for public/homes shares
- Add global fruit VFS for Apple compatibility
- Move fruit:model=TimeCapsule to ldx-timemachine share only
- Disable Spotlight on timemachine share
- Fix package renames for 25.11: targetcli→targetcli-fb, dstat→dool

Co-Authored-By: Claude Opus 4.6 <[email protected]>

skydick: bump TM max size to 3T for three Macs ...

1T was too tight — 579G already used across 3 sparsebundles left only
~450G visible to macOS. 3T leaves headroom for growth while keeping 7T
of the 10T ldx quota available for other datasets.

Co-Authored-By: Claude Opus 4.6 <[email protected]>